Wiki source code of 02. Installing PyNN

Version 22.15 by shailesh on 2021/10/07 14:02

version	line-number	content
3.1	1	(% class="box warningmessage" %)
	2	(((
8.1	3	tutorials under development for Linux, Mac OS, Windows, Jupyter Lab.
3.1	4	)))
4.1	5
5.1	6
4.1	7	== Learning objectives ==
	8
6.1	9	In this tutorial, you will learn how to install PyNN, together with the NEST, NEURON and Brian2 simulators, on Linux / Mac OS / Windows / in EBRAINS Jupyter Lab.
4.1	10
6.1	11	(% class="box infomessage" %)
	12	(((
	13	Note: There will be a separate tutorial for each environment.
	14	)))
	15
4.1	16	== Audience ==
	17
5.1	18	This tutorial is intended for people with at least a basic knowledge of neuroscience (high school level or above) and basic familiarity with the Python programming language. It should also be helpful for people who already have advanced knowledge of neuroscience and neural simulation, who simply wish to learn how to use PyNN, and how it differs from other simulation tools they know.
4.1	19
	20	== Prerequisites ==
	21
7.1	22	To follow this tutorial, you will need a computer with [Linux/Mac OS/Windows] and a good network connection. You will need to know how to open the terminal application for your operating system.
4.1	23
7.1	24
	25	OR
	26
	27
	28	To follow this tutorial, you will need an EBRAINS account. You should know how to create and use Jupyter notebooks in the EBRAINS Jupyter Lab.
	29
4.1	30	== Format ==
	31
10.1	32	These tutorials will be screencasts, in which the presenter runs commands in a terminal (or in a Jupyer notebook), and the viewer is expected to follow along. The intended duration is 10 minutes. For the Jupyter version of the tutorial, the final notebook will also be made available.
4.1	33
	34	== Script ==
5.1	35
11.1	36	(% class="box successmessage" %)
	37	(((
	38	Slide showing tutorial title, PyNN logo, link to PyNN service page.
	39	)))
	40
	41	Hello, my name is X.
	42
12.1	43	This video is one of a series of tutorials for PyNN, which is Python software for modelling and simulating spiking neural networks.
5.1	44
12.1	45	For a list of the other tutorials in this series, you can visit ebrains.eu/service/pynn, that's p-y-n-n.
	46
	47	(% class="box successmessage" %)
	48	(((
	49	Slide listing learning objectives
	50	)))
	51
18.2	52	In this tutorial, I will guide you through setting up PyNN, together with the NEST, NEURON and Brian2 simulators, in a Linux environment. Note that we have a dedicated version of this tutorial for other environments, such as Mac OS, Windows and EBRAINS Jupyter Lab.
12.1	53
18.1	54	(% class="box successmessage" %)
	55	(((
	56	Slide listing prerequisites
	57	)))
5.1	58
22.13	59	I shall be demonstrating the installation on a computer with Ubuntu 20.04 OS installed. The steps are likely to remain very similar for other versions of Ubuntu OS, and also not expected to vary significantly for other Linux distributions. In the latter case, you will find on the Internet about how to carry out the equivalent of the tasks demonstrated here using Ubuntu OS. Also, the tutorial will focus only on Python 3, as Python 2 has now been deprecated. It is recommended to use Python version 3.6 or higher. I would be using Python 3.9.7 in this tutorial.
18.1	60
21.4	61	(% class="box infomessage" %)
	62	(((
21.8	63	Screencast - terminal
21.4	64	)))
	65
21.6	66	We shall make use of virtual environments in this tutorial. This allows multiple Python projects to coexist on the same computer, even when they might have different, and even conflicting, requirements. It helps isolate projects and thereby preventing unrequested changes in others, when any one of them is updated.
5.1	67
21.8	68	We begin by creating a directory for our project.
	69
21.4	70	(% class="box infomessage" %)
21.2	71	(((
21.8	72	Screencast - terminal
	73	\\(% style="color:#000000" %)cd ~~
21.5	74	mkdir pynn_project
	75	cd pynn_project
21.2	76	)))
5.1	77
21.8	78	Next we shall create a virtual environment within this directory. Python 3 provides intrinsic support for creating virtual environments. Since Python 3.6, the recommended method of creating a new virtual environment is as follows:
	79
22.8	80	(% class="box errormessage" %)
	81	(((
	82	Note:
	83	For older versions of Python 3, you might require to manually install `python3-venv` package before being able to run the below command. To install, run:
	84	\\sudo apt-get install python3-venv
	85	\\More recent versions of Python 3 (e.g. v3.9) already have this pre-installed.
	86	)))
	87
21.8	88	(% class="box infomessage" %)
	89	(((
	90	Screencast - terminal
22.14	91	\\(% style="color:#000000" %)python3 -m venv pynn_env
21.8	92	)))
	93
21.9	94	This will create a sub-directory named 'pynn_env' within our project directory, with several files and sub-directories. Let us take a look at the 'site-packages' directory.
21.8	95
	96	(% class="box infomessage" %)
	97	(((
	98	Screencast - file explorer
21.11	99	\\(% style="color:#000000" %)<< show directory contents; especially lib/python3.9/site-packages >>
21.8	100	)))
	101
21.9	102	As you see here, only a limited number of basic packages have currently been installed in this virtual environment. In the steps ahead, we shall install various other packages, and you shall see that these would be reflected here.
21.8	103
21.11	104	To enter into this virtual environment, and thereby use its resources in isolation from other projects on your computer, we require to "activate" it. This is achieved by running the command:
	105
	106	(% class="box infomessage" %)
	107	(((
	108	Screencast - terminal
	109	\\(% style="color:#000000" %)source pynn_env/bin/activate
	110	)))
	111
22.1	112	Notice how this changes the command prompt to show the name of your virtual environment. In our case, we had named it 'pynn_env', and this is now reflected as a prefix to the command prompt. This confirms that we are now in our new virtual environment.
	113
21.7	114	Now that we have our project's virtual environment setup, we are now ready to install PyNN and other simulators. In general, it is advisable to install the various simulators (especially NEURON and NEST) prior to installing PyNN, because PyNN will then auto compile NEURON's NMODL fles and NEST's extensions during installation. Alternatively, this would need to be done manually as described on the PyNN website. In this tutorial, we will adopt the easier approach and begin by installing the simulators. For the purposes of this tutorial, we shall demonstrate the installation of Brian2, NEURON and NEST simulators.
21.2	115
22.2	116	We start here with the installation of Brian2. Brian2 can be installed simply using the pip command.
21.4	117
21.7	118	(% class="box infomessage" %)
	119	(((
21.10	120	Screencast - terminal
22.4	121	\\(% style="color:#000000" %)pip install brian2
21.7	122	)))
	123
22.11	124	This will install Brian2, along with all its dependencies such as 'cython', 'numpy', etc. We can now go back into our virtual environment's 'site-packages' directory to see how it is now populated with all these packages.
21.7	125
22.6	126	(% class="box infomessage" %)
	127	(((
	128	Screencast - file explorer
	129	\\(% style="color:#000000" %)<< show directory contents lib/python3.9/site-packages >>
	130	)))
	131
22.4	132	To confirm that we have properly installed Brian2 on our computer, we can test as follows:
	133
22.2	134	(% class="box infomessage" %)
	135	(((
22.4	136	Screencast - terminal
	137	\\(% style="color:#000000" %)python
	138	\\import brian2
22.7	139	\\exit()
22.4	140	)))
	141
22.6	142	If there are no error messages here, and the import is successful, then we have completed installing Brian2.
22.5	143
22.7	144
	145	We shall now move on to install the NEST simulator. Unlike Brian2, NEST is not a Python package and therefore its installation is a bit more involved. We shall install the NEST module along with PyNEST, which is a Python interface for controlling the NEST kernel.
	146
	147	We first install the NEST module. Version 2.20 is currently supported by PyNN, and it is likely that other versions of NEST might have issues when used with the current version of PyNN. The installation is done by first adding the PPA repository for NEST and updating apt, followed by the installation of NEST itself.
	148
	149	(% class="box infomessage" %)
	150	(((
	151	Screencast - terminal
	152	\\(% style="color:#000000" %)sudo add-apt-repository ppa:nest-simulator/nest
	153	sudo apt-get update
	154	\\sudo apt-get install nest
	155	)))
	156
	157	At this point, we have installed the NEST module, but it is still not usable via Python. To do so, we next install PyNEST.
	158
	159
	160
21.1	161	(% class="box successmessage" %)
	162	(((
	163	Slide recap of learning objectives
	164	)))
5.1	165
20.1	166	That is the end of this tutorial, in which I've demonstrated how to install PyNN, and other required simulators, in a Linux system. You are now ready to start modeling! To learn about model development in PyNN, do take a look at our next tutorial.
	167
	168	Als, we will be releasing a series of tutorials, throughout the rest of 2021 and 2022, to introduce these more advanced features of PyNN, so keep an eye on the EBRAINS website.
	169
21.1	170	(% class="box successmessage" %)
	171	(((
	172	Slide acknowledgements, contact information
	173	)))
20.1	174
21.1	175	(% class="wikigeneratedid" %)
20.1	176	PyNN has been developed by many different people, with financial support from several different organisations. I'd like to mention in particular the CNRS and the European Commission, through the FACETS, BrainScaleS and Human Brain Project grants.
	177
21.1	178	(% class="wikigeneratedid" %)
20.1	179	For more information visit neuralensemble.org/PyNN. If you have questions you can contact us through the PyNN Github project, the NeuralEnsemble forum, EBRAINS support, or the EBRAINS Community.
21.8	180
	181
	182	(% class="wikigeneratedid" %)
	183	[[https:~~/~~/realpython.com/python-virtual-environments-a-primer/>>https://realpython.com/python-virtual-environments-a-primer/]]

Wiki source code of 02. Installing PyNN

PyNN: resources